Echo 74624S Owners Manual v.2 - Manual (Page 10)

8
SAFETY
See Section 1.11 for decal locations. Familiarize yourself with all of the safety and operating decals on the machine
and the associated hazards. See the engine owners manual or contact the engine manufacturer for engine safety in-
structions and decals. Make certain that all safety and operational decals on this machine are kept clean and in good
condition. the decals are shown below at reduced sizes. Refer to the parts catalog if you need a replacement decal.
decals that need replacement must be applied to their original locations.
1.10 SafeTY decalS (con'T)
12
PN 14049-00
10
PN 14302-00
11
PN 14528-00
PN 16558
13
DANGER
FLYING DEBRIS FROM DISCHARGE
PN 16558
KEEP CLEAR OF DISCHARGE AT ALL TIMES.
POINT DISCHARGE AT AREA FREE OF
BYSTANDERS OR ANYTHING THAT COULD BE
DAMAGED BY FLYING DEBRIS. DO NOT
CLEAN OR ADJUST MACHINE UNLESS ENGINE
AND ROTOR HAVE COME TO A COMPLETE
STOP. DO NOT OPERATE WITHOUT ALL
GUARDS IN PLACE.
PN 17423
14
model 74624S onlY
Read aNd uNdeRStaNd tHIS
oWNeR/oPeRatoRS MaNual.
be CoMPletely FaMIlIaR
WItH tHe CoNtRolS aNd tHe
PRoPeR uSe oF tHIS eQuIP-
MeNt.
PN 13711-00
9
model 74628S onlY
7
CHeCk blade boltS FoR PRoP-
eR toRQue aFteR eveRy 8
HouRS oF oPeRatIoN. CHeCk
bladeS aNd Rotate oR Re-
SHaRPeN daIly oR aS ReQuIRed
to keeP bladeS SHaRP. Re-
FeR to oWNeRS MaNual FoR
INStRuCtIoNS. FaIluRe to do
So May CauSe PooR PeRFoR-
MaNCe, daMage oR PeRSoNal
INJuRy aNd WIll voId tHe Ma-
CHINe WaRRaNty.
PN 12250
8
PN 12737
CAUTION
TO OPERATE AUTO FEED:
TO ACTIVATE THE AUTO FEED SYSTEM.
TURN SWITCH TO "ON" POSTITION.
TO ACTIVATE THE MANUAL FEED SYSTEM.
TURN SWITCH TO "OFF" POSTITION.
WHEN USING THE AUTO FEED SYSTEM,
RUN ENGINE AT FULL SPEED, FEED MATERIAL
INTO CHIPPER AND STAND CLEAR. CHIPPER
WILL AUTOMATICALLY START AND STOP THE
FEED ROLLER.
REFER TO OPERATION AND MAINTENANCE
MANUAL FOR ADDITIONAL INSTRUCTION.
PN 12737
model 74628S onlY
model 74628S onlY