IOGear GWA504 Manual - Manual (Page 9)

2 4
3
6
Pictorial Introduction
1. LAN ports: Ethernet Ports. Allows
connections of up to four computers or daisy-
chain out to more hubs and switches.
2. WAN port: The WAN port is where you
connect your Cable or DSL modem through
an ethernet cable. It’s the only port that
connects to the Internet.
3. Reset button: The reset button can reboot the
router or set back to factory default setting.
Pess about 2 seconds to reboot the router;
press over 5 seconds to go back to factory
setting.
4. Power Jack: Power cable connection for 12V
adapter.
Back View
1