IOGear GWA504 Manual - Manual (Page 19)

16
Quick Installation
Cable Modem and DHCP Client
If your broadband access is through a cable
modem or if your IP address is automatically
assigned by your service provider or a DHCP
server, you should choose this type. And, if you are
not sure of your connection type, please try this
setting first.
Static IP - xDSL
If your broadband access is through an xDSL
modem and your ISP assigned you a static IP
Address, you should choose this type. This setting
is commonly used in office.
Dynamic IP - PPPoE
If your broadband access is through an xDSL
modem and your ISP requires the use of PPPoE,
you should choose this type. This setting is
commonly used at home.
PPTP (European Countries)
If your broadband access is through an xDSL modem
and your ISP requires the use of PPTP, you should
choose this type. This setting is commonly used at
home.
L2TP
Some ISPs require the use of L2TP to connect to their
services.
Dynamic IP - Telstra BigPond
The BigPond Internet service is available in Australia