IOGear GWA504 Manual - Manual (Page 34)

31
Your wireless router can act as a DHCP server, and
assign IP addresses to your clients automatically. This
function is enabled by default. The assigned IP
addressed will be within the range of IP pool that you
specify. It is a good security practice to set just enough
range of IP pool for the devices you want to connect to
this wireless network. This can block other unintended
devices to enter your network.
• IP Pool Starting Address: Enter a value for the
DHCP server to start with when issuing IP
addresses. The default value is 100.
• IP Pool Ending Address: The maximum number of
PCs that you want the DHCP server to assign IP
addresses to. This number cannot be greater than
253.
DHCP Server
Configuration Utility