IOGear GWA504 Manual - Manual (Page 14)

Enable
DHCP
Function
Obtain
a Static ID
Note: The default IP address of the router is
192.168.123. 254 so the IP address for the Ethernet
Adapter must follow the 192.168.123.x IP address
format and the IP should not be the same IP address
assigned to any other devices in the network.
Installation
11
4. In the General tab, you can choose either obtain
an IP address automatically or Use the following IP
address.
• Enable DHCP: Click the button of Obtain an IP
address automatically.
• Use static IP address: Click the button of Use the
following IP address. For example, in the IP
address field, enter in the following IP address:
192.168.123.101.