IOGear GWA504 Manual - Manual (Page 67)

Description:
It means the WAN users can access this FTP
server only at 08:30~17:30 everyday. If the time
exceeds this range, the WAN users can’t access
the LAN FTP server. Use rule #
Choose the schedule when you want to make this
service take effect, and select the ID you want to
use with the schedule rule. Then click “Copy to”
botton to copy it into the “Use rule #” box to use the
schedule. When choosing rule 0 for always, it is the
same as not using schedule.
Schedule example
Assume that there is a rule setting in Rule 1 which
is Everyday 8:30~17:30, and there is a FTP server
which IP is 192.168.123.15 listening port 21. The
Virtual Server’s setting is as below:
Configuration Utility
64