IOGear GWA504 Manual - Manual (Page 45)

42
After installed, the Windows WPA Client will update
the wireless network configuration dialog boxes to
support new WPA options.
1. Click Connect To>Wireless Network Connection
to bring up the dialogue window of Wireless
Network Connection Status. Click the
Properties box to bring up next dialogue window.
2. In the Wireless Network Connection Properties
window, under Wireless Networks tab, please
check the box of “Use Windows to configure my
wireless network settings” to turn on the
Wireless Zero Configuration service. Select the
wireless access point you want to associate to,
then click Configure box at the right side to bring
up next dialogue window.
Configuration Utility