IOGear GWA504 Manual - Manual (Page 69)

Configuration Utility
Log Setting This page support two methods to export system
logs to specific destination by means of
syslog(UDP) and SMTP(TCP). The items you have
to setup including:
IP Address for Syslogd
Host IP of destination where syslogs will be sent to.
Check Enable to enable this function.
E-mail Alert Enable
Check if you want to enable Email alert(send syslog
via email).
SMTP Server IP and Port
Input the SMTP server IP and port, which are
concated with ‘:’. If you do not specify port number,
the default value is 25.
For example,”192.168.1.100:26".
66