BOXLIGHT MP63e - Manual (Page 52)

52
Cleaning the Air Filter
A.
Wh
en th e air filter becomes clogged with dust, etc., th e pr ojector may
overheat
and turn itself off to prevent internal damage.
When cleaning the filter, stand the projector up on its side to prevent dust from
entering the projector. Use a vacuum to remove the dust fr
om th e
outside of the
air filter. Do not operate th
e pr ojector with th e air filter r emoved.
B.
Clean the air filter ever
y 100 h our s.
*If the filter is difficult to clean or if it is deteriorating, it should be replaced
1..Remove th e filter cover
from th
e bottom of pr ojector.
2..Pull out the air filter.
3..Install the new air filter .
1. 2.