BOXLIGHT MP63e - Manual (Page 42)

42
4. ADVANCE
D
zoom/pan execute
temporarily enlarge a portion of the
image and view portions of the image
that are not visible in the display area
still on / off freezes the current image on the screen
blank on / off
Hides the image, displays a blank, black
screen * (see below)
reset all execute
resets all OSD Menu functions to their
factory default values *(see below)
language
Eng select the language that the OSD Menu
and on screen massage are displayed in
English/Chinese(s)/
Chinese(t)/Italian/Spanish/French/German
select source select the input source from:
computer1 / computer2(RGB) /
computer2(YPbPr) / DVI / video /
s-video / Y Cb Cr
Computer2
mode RGB/
YPbPr
Switches computer2 input:RGB /Y Pb Pr
*Blan k on
If th e pr ojector is left in Blan k mode for mor e than
15 min
utes, th e
projector will automatically shut off the lamp and enter cool-down mode.
*Reset all
1. After you select [reset all] on the OSD men u, the following con
firmation
message will appear on th e scr een .
2. Press reset button on the remote control or the button on the
keypad to reset the OSD Menu values. Press the ESC button or ignore
the message to exit the Reset All fuction without changing any settings.