Brother HE 120 - Manual (Page 38)

GETTING READY
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
32
e
Insert the thread cassette (with the extra spool
pin attached) into the thread cassette
compartment.
• For more details, refer to step
e
in "Using
the extra spool pin" (page 29).
X Pass both threads through the needle bar
thread hooks.
• If the thread cassette is inserted with the twin
needle attached, the sewing machine may be
damaged.
f
Install the twin needle.
• For details, refer to "Replacing the needle"
(page 37).
g
Manually thread the left needle with the
thread for the left side of the stitch.
• For details, refer to "Thread the needle
manually (without using the needle threader)"
(page 30).
h
Remove the thread for the right side of the
stitch from only the lower hook of the needle
bar thread hooks, and then use it to thread the
right needle.
i
Attach zigzag foot "J".
• For details on changing the presser foot, refer
to "Replacing the Presser Foot" (page 40).
CAUTION
j
Turn on the sewing machine and select a
stitch.
• For stitch selection see "Selecting stitching"
(page 47).
• See "Stitch Settings" (page 66) for stitches that
use a twin needle.
CAUTION
k
Press (Settings key) in the operation
panel.
X The settings screen appears.
l
Press .
X displays in reverse highlight.
• If pressed again, it returns to .
X The twin needle can now be used.
● When using the twin needle, be sure to
attach zigzag foot "J", otherwise the
needle may break or the machine may be
damaged.
● When using the twin needle, be sure to
select an appropriate stitch, otherwise the
needle may break or the machine may be
damaged.
SE-BrotherE_sgml.book Page 32 Monday, June 30, 2003 3:44 PM