Brother HE 120 - Manual (Page 130)

124
UTILITY STITCHES
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Entering the pattern data
Follow the pattern drawn on the grid sheet and
program the pattern into the sewing machine.
a
Attach monogramming foot "N".
• For details, refer to "Replacing the presser
foot" (page 40).
b
Press (Menu key) on the operation
panel, and then press .
X The screen for selecting pattern types is
displayed.
c
Select .
X The screen for entering a pattern appears.
d
Check the grid sheet set, and specify the
coordinates of the first point.
Specify the coordinates using
, and
press .
e
Specify whether single stitching or triple
stitching will be sewn between the points.
is single stitching, and gives triple
stitching.
f
Specify the coordinates of the second point,
and then press
.
g
Repeat steps
e
through
f
to specify each
point.
• If you make a mistake entering a point, press
, and the previous point is erased.
• To correct the content entered, press .
You can insert, delete and move points.
h
After all points have been entered, press .
X The embroidery screen appears.
SE-BrotherE_sgml.book Page 124 Monday, June 30, 2003 3:44 PM