Brother HE 120 - Manual (Page 157)

Embroidering 151
4
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
d
Lower the presser foot lever.
a Presser foot lever
e
Press (Start/stop button).
a Start/stop button
f
After progressing 5-6 stitches, press (Start/
stop button), and the sewing machine will
stop.
g
Use scissors to cut the thread at the beginning
of the stitching.
Cut the thread at the edge of the stitching.
• If the thread is left at the beginning of the
stitching, it will be sewn into the pattern, and
it cannot be taken care of neatly. Take care of
the thread at the beginning of the stitch for
each color.
h
Press (Start/stop button) again.
X The embroidery begins again.
X Stitching stops automatically with
reinforcement after one color has been
completed. When automatic thread cutting
is set, the thread is cut.
i
Remove the thread cassette.
a Thread cassette eject lever
j
Set up embroidery thread for the next color,
and repeat steps
a
-
i
.
X When the final color is complete, it returns
to the initial screen.
k
Cut the excess thread.
Memo
z It is convenient if the next color is set up in
another thread cassette while the sewing is
going on.
z For the automatic cutting setting, refer to
"Changing the Machine Settings" (page 15).
1
1
1
SE-BrotherE_sgml.book Page 151 Monday, June 30, 2003 3:44 PM