JLG X14JH Operator Manual User Manual

Page 33

2.4.1.4 CRAWLER HYDRAULIC CONTROLS

The controls for translating and stabilising the machine have been designed to be operated
from the basket. This way the operator is protected from any risks caused by contact with the
rubber tracks and the stabilisers and they are able to see clearly the levelling indicator for
stabilising the control car.

When controlling the translation of the machine from the control car, take the maximum care
to elements like cornices, terraces, lintels, branches etc. that could come into contact with the
operator.

If the machine translation is controlled from the ground (see par.2.1), remember that the
machine must be orientated with the part of the control car toward the back so that, in case
of a wrong manoeuvre, the operator does not come into contact with the rubber tracks.

It is absolutely forbidden to do manoeuvres different from those mentioned above, by con‑
trolling translation from the ground as a possible sharp movement of the machine could
crush the operator between itself and the elements present on the manoeuvring area or could
make the operator come into contact with the platform rubber tracks.

BOOM LIFT MODELS X14JH

JLG

X14JHR0220311

ATTENZIONE

WARNING