Personnel work platform - fork mounted, Personnel work platform - fork mounted -32 – JLG G12-55A AccuPlace Operator Manual User Manual
Page 100
Section 5 - Attachments
5-32
3128447
Personnel Work Platform - Fork Mounted
Use Appropriate Carriage Attachment Capacity Chart
To determine maximum capacity, refer to “Telehandler/
Attachment/Fork Capacity” on page 5-3.
The operator and personnel in platform must read and understand the
separate personnel work platform manual prior to installing and using a
platform.
The joystick (1) controls lift/lower and extend/retract movement of the boom.
The attachment tilt roller switch (2) controls platform tilt.
• Push roller switch down to tilt up.
• Push roller switch up to tilt down.
Installation Procedure:
• Ensure carriage is properly installed. Refer to “Attachment Installation” on
• Check to ensure the personnel platform is securely attached to the forks and/or
carriage.
OY1610
OY1620
1
2