JLG G6-42A Operator Manual - Manual (Page 5)

Form No. 20036 • G6-42A Owner/Operator Manual
REVISIONS
This page is provided so you may determine that this Manual is complete and current with respect to Gradall
Engineering Specifications.
Page Date Revision
17.1 7-22-02 Added an additional lubrication notice.
Cover 6-13-03 Revised Notes & Serial Numbers.
Intro Revised Operator Qualification section.
2.0 Revised all.
2.1 Revised all.
2.2 Replaced 9140-3525 Decal with 9150-3102 Decal.
2.3 Replaced 9147-3123 Decal with 9147-3217 Decal; added 9141-3061 Decal &
P/N’s to Angus Palm Decal.
2.4 Revised locations on 9108-3492, 9114-3288, 9114-3284, 9114-3281 &
9114-3285 Decals.
2.5 Revised location on 9114-3282 Decal.
3.0 Revised Operator’s Cab section & Figure 3-1.
3.1 Revised Warning.
3.2 Revised Service Brake description.
6.0 Revised Cold-Weather Starting Aid section.
7.0 Revised Service Brake section.
8.0 Revised Precaution & Parking Procedure sections.
12.2 Revised Load Center section; Removed Figure.
12.3 Changed Figure 12-5 to 12-4.
12.4 Changed Figure 12-6 to 12-5.
13.1 Revised Attachment Operation section.
13.8 Revised Personnel Work Platform section.
14.0 Revised Step 4; Added Figure 14-1.
16.0 Revised Moving Short Distances section.
16.1 Added Carraro Axle to title; changed all chock references to block.
16.2 Added Page for Dana Axle.
17.0 Added Figure 17-1.
17.1 Revised Art.
17.3 Changed Carraro Axle Values & Added Dana Axle Values.