JLG G6-42A Operator Manual - Manual (Page 44)

13.8
WARNING !
Do not use the Personnel Work
Platform until you study &
understand the “ Capacity
Chart”. If your handler does not
have the correct “Personnel
Work Platform Capacity Chart”,
ask your supervisor to get one
before using the attachment.
WARNING !
Do not use a boom mounted
winch while the platform is
mounted to the boom.
Personnel Work Platform
The material handler operator and personnel in the platform must read
and understand the separate personnel work platform manual, included
with the attachment, prior to using the platform.
Capacity:
The Gradall personnel work platform is designed to carry a maximum of 3
occupants. The load includes personnel, materials, tools, etc. The maximum
capacity of your work platform is based on specific model material handler/
work platform combination. To determine maximum load capacity for given
operating ranges, consult the proper load capacity chart (furnished with
platform) for the material handler and work platform in use. If your
handler is not equipped with the proper personnel work platform
capacity chart, get one before using the attachment.
Installation Procedure:
1. Remove carriage/fork combination or other attachment from boom head.
See page 13.1.
Operation:
• Gradall Personnel Work Platforms are approved for use only on Gradall
Material Handlers equipped with the proper platform capacity chart.
• When lifting personnel, use only a Gradall manufactured personnel work
platform. No other platform is approved for use on Gradall Material
Handlers.