JLG 660SJ Parts Manual - Manual (Page 215)

SECTION 4 - PLATFORM
3121207 600S/660SJ/600SJ 215
FIGURE 4-1. PLATFORM COMPONENTS INSTALLATION
ITEM PART NUMBER QTY DESCRIPTION REV
Ref PLATFORM ASSEMBLY WITH GATE:
Ref USA Built Machines:
3510830 Ref Platform 30in x 4ft (76cm x 1.22m) (Use p/n 1001144027) (SN
0300087000 through 0300168214) B-M
1001144027 Ref Platform 30in x 4ft (76cm x 1.22m) (SN 0300168215 through
0300171769) B
3510831 Ref Platform 30in X 5ft (76cm x 1.52m) with No Mesh) (Use p/n
1001144026) (SN 0300087000 through 0300168214) B-L
1001144026 Ref Platform 30in X 5ft (76cm x 1.52m) with No Mesh) (SN
0300168215 through 0300171769) B
3510833 Ref Platform 36in X 6ft (91.5cm x 1.83m) with No Mesh) (Use p/n
1001144024) (SN 0300087000 through 0300168214) B-I
1001144024 Ref Platform 36in X 6ft (91.5cm x 1.83m) with No Mesh) (SN
0300168215 through 0300171769) B
3510822 Ref Platform 36in X 8ft (91.5cm x 2.44m) with No Mesh) (Use p/n
1001144023) (SN 0300087000 through 0300168214) B-J
1001144023 Ref Platform 36in X 8ft (91.5cm x 2.44m) with No Mesh) (SN
0300168215 through 0300171769) B
Ref China Built Machines:
1001114335 Ref 36in x 72in (0.9m x1.83m) with No Mesh) (Use p/n
1001146180) (SN B300000100 through B300000667) B-D
1001146180 Ref 36in x 72in (0.9m x1.83m) with No Mesh) (SN B300000668 to
Present) B
1001114391 Ref 36in x 96in (0.9m x 2.44m) with No Mesh) (Use p/n
1001146179) (SN B300000100 through B300000667) B-D
1001146179 Ref 36in x 96in (0.9m x 2.44m) with No Mesh) (SN B300000668 to
Present) B
Ref Note: Original Equipment platform may have been replaced
with Service Replacement platform. Identify platform before
ordering parts.
Ref Note: For Platforms with Mesh to the Top Rail, customer
must order Platforms and Mesh separately. See SPECIAL
OPTIONS SECTION for Mesh Installations.
Ref Note: Replacement Decals Must Be Ordered Separately - See
DECALS SECTION.
Ref Note: When replacing 8ft/2.44m platform with Soft Touch
option, new Soft Touch Rail p/n 4846673 must be purchased
to accommodate limit switch locations.
Ref Note: When replacing platform on machines with SkyCutter
option, new bracket p/n 1001145405 must be purchased to
accommodate SkyCutter components.
2 2080040 16 Fastener, Huck
3 2600281 2 Hinge, Self-Closing
4 2940074 1 Latch
6 See Note 1 Platform Weldment (Note: Purchase Complete Platform
Assembly.)
7 Ref Cap-Plug Options:
7 3520072 1 USA Built Machines
7 Ref China Built Machines
7 3520072 1 Cap-Plug (SN B300000100 through B300000667)
7 1001152037 1 Cap-Plug (SN B300000668 to Present)
8 3820020 4 Rivet
10 Ref Gate Weldment Options:
10 Ref USA Built Machines