JLG 660SJ Parts Manual - Manual (Page 171)

SECTION 2 - TURNTABLE
3121207 600S/660SJ/600SJ 171
FIGURE 2-29. 2500W GENERATOR INSTALLATION - GM MACHINES (OPTIONAL)
ITEM PART NUMBER QTY DESCRIPTION REV
Ref Note: Only Available on USA Built Machines.
Ref GENERATOR INSTALLATION OPTIONS:
0275039 Ref 110V Generator E
See Note Ref 220V Generator (Note: Not Available for Purchase.)
Ref Note: Refer to Sky Power Accessories Manual p/n 3124242 for
the Miller 7500W Generator.
1 0100011 AR Compound, Locking
2 0480142 1 V-Belt
3 0641405 1 Bolt 1/4in-20NC x 5/8in
4 Ref Bolt Options:
4 0641514 1 Bolt 5/16in-18NC x 1-3/4in (SN 0300087000 through
0300094704)
4 0641510 1 Bolt 5/16in-18NC x 1-1/4in (SN 0300094705 through
0300171769)
5 0641710 2 Bolt 7/16in-14NC x 1-1/4in
6 0700820 1 Bolt 8mm x 60mm
7 0701016 1 Bolt 10mm x 340mm
8 Ref Generator and Control Box Assembly Options:
8 2460051 1 110Volt Assembly
8 2460052 1 220Volt Assembly
8A Ref Generator Options:
8A 7012558 1 110Volt Assembly
8A 1001100321 1 220Volt Assembly (Was p/n 70000128)
Ref Note: Replacement Generators come standard with p/n
3580134 pulley. This pulley may not be correct for all
applications. Refer to pulley options below.
8A Ref Armature with Slip Rings Options:
8A 7026199 1 Armature with Slip Rings - 110V/60Hz
8A 70000123 1 Armature with Slip Rings - 220V/50Hz
8A 7020109 4 Holder, Brush
8A 7020108 4 Brush
8A 7012513 4 Cap, Brush Holder
8A 7012514 1 Fan
8A 7020110 1 Bell, Front
8A 7020111 1 Bell, Rear
8A 7020190 2 Bearing
8B Ref Box, Control Options:
8B 7019680 1 Box, Control - 110V/60Hz (was p/n 7003657)
8B 70000127 1 Box, Control - 220V/50Hz
8B Ref Breaker, Circuit Options:
8B 7020194 1 110V Breaker, Circuit
8B 70000126 1 220V Breaker, Circuit
8B 70000124 1 Receptacle, Double (220V/50Hz Only)
8B 70000125 1 Receptacle, Single (220V/50Hz Only)
8B 3520028 1 Plug, Hole
8C Ref Voltmeter Options:
8C 2420203 1 110V Voltmeter (was p/n 7010699)
8C 7020192 1 220V Voltmeter
8D Ref Pulley Options:
8D 3580324 1 110Volt Assembly
8D 3580325 1 220Volt Assembly