JLG LiftPOD FS80 (1001070465) - Manual (Page 50)

SECTION 3 - MACHINE OPERATION
1001070465 LIFTPOD by JLG
3-22 www.liftpod.com
Parking and Storage
• Move machine to a dry, well-protected and well-ventilated
area out of direct sunlight.
• Ensure the platform is fully lowered. If installed, move the
powerpack’s direction control switch to the OFF position.
• If necessary, remove the cordless drill or optional power-
pack from the platform to prevent unauthorized use.
• Ensure the swivel castor is retracted and the machine is
resting on the adjustable feet.
NOTICE
DO NOT STORE IN LOCATIONS WHERE THE MACHINE MAY ACCUMU-
LATE ICE, GREASE OR AIRBOURNE DEBRIS.
Vehicle Transport
When transporting the machine by vehicle, it should be disassem-
bled into its major components (see Figure 3-1.) and each compo-
nent secured separately. Restrain each component of the machine
securely during transport. Ensure the swivel castor is retracted in
the base frame and the base frame is resting on the adjustable
feet.
NOTICE
USE OF EXCESSIVE FORCE WHEN SECURING MACHINE CAN CAUSE
DAMAGE TO THE MACHINE.
Secure machine to the transport vehicle with adequately rated
rope or straps. Do not overtension such devices and place a
buffer between the device and any part of the machine.