3 operation, General, Operation -3 – JLG LiftPOD FS80 (1001070465) User Manual
Page 13: General -3

SECTION 1 - SAFETY PRECAUTIONS
LIFTPOD by JLG
1001070465
www.liftpod.com
1-3
MODIFICATION OR ALTERATION OF A MACHINE SHALL BE MADE ONLY
WITH PRIOR WRITTEN PERMISSION FROM THE MANUFACTURER.
• Do not operate any machine on which the safety or
instruction placards or decals are missing or illegible.
• Avoid any build up of debris on platform floor. Keep mud,
oil, grease, and other slippery substances from footwear
and platform floor.
1.3
OPERATION
General
• Do not use the machine for any purpose other than posi-
tioning personnel, their tools and equipment.
• Never operate a machine that is not working properly. If a
malfunction occurs, shut down the machine and contact
JLG.
• Never slam a control switch or lever through neutral to an
opposite direction. Always return switch to neutral and
stop before moving the switch to the next function. Oper-
ate controls with slow and even pressure.
• Do not allow personnel to tamper with, or operate the
machine from the ground with personnel in the platform,
except in an emergency.
• Do not carry materials directly on platform railing unless
approved by JLG.
• Always ensure that power tools are properly stowed and
never left hanging by their cord from the platform work
area.
• Fully lower platform and shut off all power before leaving
machine.
• No riders are permitted on the machine. Only the operator
is permitted in the machine during operation.