JLG 3246ES Parts Manual - Manual (Page 9)

3121246 1930ES, 2030ES 2630ES, 2646ES & 3246ES 1-3
SECTION 1 FRAME
FIGURE 1-1. STEERING, DRIVE AND REAR AXLE INSTALLATIONS
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref. STEERING INSTALLATION
0272371 Ref. 1930ES F
0273227 Ref. 2030ES/2630ES C
0272372 Ref. 2646ES/3246ES G
1 0440259 2 Bearing, Flanged
2 4 Bolt M10 Options:
0701016 40mm Length
0701020 60mm Length
3 1380153 4 E-Clip
4 1 Steer Cylinder Assembly (See Section 5 for Breakdown):
1684237 1930ES/2030ES/2630ES
1684263 2646ES/3246ES
5 to 6 Not Used
7 3423037 4 Pin, Clevis
8 4812000 4 Flatwasher M10
9 4846757 2 Lug, Steer
10 0100011 A/R Compound, Locking
11 1320318 2 P-Clamp (Not Shown - Used with Steer Hoses) (USA Built
Machines Prior to S/N 0200124799 & Belgium Built Machines
Prior to S/N 1200002594)
12 1380158 2 Clip (Not Shown - Used with Item 11) (USA Built Machines Prior
to S/N 0200124799 & Belgium Built Machines Prior to
S/N 1200002594)
13 2110404 2 Fitting, Straight
Ref. DRIVE INSTALLATION
0272710 Ref. 1930ES L
0274224 Ref. 1930ES (UL SPEC) C
0272711 Ref. 2030ES/2630ES L
0274225 Ref. 2030ES/2630ES (UL SPEC) C
0273008 Ref. 2646ES/3246ES L
0274226 Ref. 2646ES/3246ES (UL SPEC) C
101 Not Used
102 2 Wheel Drive Assembly Options:
Ref. 1930ES
No Longer
Available - See
Note
USA Built Machines Prior to S/N 0200118041 & Belgium
Built Machines Prior to S/N 1200001487
(was p/n 0272305) (See Figure 1-2 for Breakdown)
NOTE: To replace the complete unit both right & left Drive
Assemblies must be upgraded at the same time. Order
qty 2 of p/n 2915236.
Use 2915236 USA Built Machines S/N 0200118041 to S/N 0200135154
& Belgium Built Machines S/N 1200001487 to
S/N 1200004293 (See Figure 1-3 for Breakdown)
(was p/n 3160306)