JLG 3246ES Parts Manual User Manual
Page 79
1930ES, 2030ES 2630ES, 2646ES & 3246ES
4-3
SECTION 4 PLATFORM
FIGURE 4-1. PLATFORM INSTALLATION
ITEM #
PART NUMBER
QTY.
DESCRIPTION
REV.
Ref.
PLATFORM INSTALLATIONS
Ref.
All Specs Except CE & Japanese Specs
0272633
Ref.
1930ES (Original Equipment)
E
1001134933
Ref.
1930ES (Service Replacement)
A
0272666
Ref.
2030ES/2630ES
E
0272698
Ref.
2646ES/3246ES
E
Ref.
CE & Japanese Specs Only
0272836
Ref.
1930ES
K
0272837
Ref.
2030ES/2630ES
L
0272838
Ref.
2646ES/3246ES
K
Ref.
Note: All versions are available on ANSI Export Spec.
1
1
Platform Assembly (See Items 101-112 for Breakdown):
Use 1001134934
1930ES (Service Replacement) (Original Equipment was p/n
0272637)
0272661
2030ES/2630ES
0272696
2646ES/3246ES
2
A/R
Block, Slide Options:
3340976
2
1930ES (Front Block)
3340965
2
1930ES (Rear Block)
1001134951
2
1930ES (Spacer Sleeve Used with Rear Block) (Service
Replacement Platforms Only)
0561520
4
2030ES/2630ES/2646ES/3246ES
3
3900351
4
Bolt M10 x 30mm
4
A/R
Bolt M10 Options:
0701022
2
70mm Length (Front Slide Block - 1930ES)
0701026
2
90mm Length (Rear Slide Block - 1930ES)
0701029
2
120mm Length (Rear Slide Block - 1930ES) (Service
Replacement Platform Only)
0701024
2
80mm Length (Front Slide Block - 2030ES/2630ES/2646ES/
3246ES)
0701027
2
100mm Length (Rear Slide Block - 2030ES/2630ES/2646ES/
3246ES)
5
Not Used
6
3291005
8
Locknut M10
7
4
Pin Options:
3423049
All Machines except CE & Japanese Specs
See Note
CE & Japanese Spec Machines (Note: Refer to JLG
Supplement p/n 3124288)
8
3574067
2
Plate, Extension Stop
9
4812000
4
Flatwasher M10
10
A/R
Bracket, Platform Containment Options:
0903579
2
Bracket (Standard on 2646ES/3246ES Only)
9984279
1
Service Kit to Install Brackets (Includes qty 2 p/n 0903579
Brackets & Instructions) (Suggested installation on ALL ES
models USA Built Machines S/N 0200127552 to 0200135154
& on ALL ES models Belgium Built Machines S/N
1200003021 to S/N 1200004293)