JLG 3246ES Parts Manual - Manual (Page 39)

3121246 1930ES, 2030ES 2630ES, 2646ES & 3246ES 1-33
SECTION 1 FRAME
FIGURE 1-10. LADDERS, BEACON LIGHT & ROTARY SENSOR COVER INSTALLATIONS
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref. LADDER INSTALLATIONS
0272887 Ref. 2030ES B
0272888 Ref. 2630ES B
Ref. Note: Not Required on Other Models
101 0701016 4 Bolt M10 x 40mm
102 3291005 4 Locknut M10
103 4420070 3 Tape, Anti-Skid
104 1 Ladder Options:
4846812 2030ES
4846813 2630ES
Ref. BEACON LIGHT INSTALLATIONS
0272309 Ref. 1930ES (Not Shown) D
0274012 Ref. 2030ES/2630ES B
0272980 Ref. 2646ES/3246ES D
201 0760410 2 Bolt M4 x 20mm
202 1 Bracket Options:
0902905 1930ES
0903086 2030ES/2630ES
0902906 2646ES/3246ES
203 2920161 1 Light, Beacon
7016319 1 Bulb, Replacement
7016372 1 Len, Replacement
204 3290405 2 Locknut M4
205 4060865 1 Guard
206 4191707 2 Screw M6 x 16mm
207 4811400 2 Flatwasher M4 (USA Built Machines Prior to S/N 0200128068 &
Belgium Built Machines Prior to 1200002847)
208 4811700 A/R Flatwasher M6
209 4750800 2 Flatwasher #8 (Wide) (USA Built Machines S/N 0200128068 to
S/N 0200135154 & Belgium Built Machines S/N 1200002847 to
S/N 1200004293)
Ref. ROTARY ANGLE SENSOR COVER KIT
Ref. Note: This kit is an optional aftermarket add-on for USA Built
Machines S/N 0200117602 to Present Only and Belgium Built
Machines S/N 1200001665 to Present Only. Not Available on
previous S/Ns due to changes in frame design. Kit also
includes instructions. Parts listed below are for service.
1001105108 Ref. 1930ES/2030ES/2630ES
1001105109 Ref. 2646ES/3246ES
301 1 Cover Options:
301A 1001103029 Cover for 1930ES/2030ES/2630ES
301B 1001103030 Cover for 2646ES/3246ES
302 2 Bolt M6 Options:
302A 0760610 Bolt 20mm Length for 1930ES/2030ES/2630ES
302B 0760612 Bolt 25mm Length for 2646ES/3246ES