JLG 3246ES Parts Manual - Manual (Page 24)

1-18 1930ES, 2030ES 2630ES, 2646ES & 3246ES 3121246
SECTION 1 FRAME
21 A/R Clamp, Cable Options:
Ref. Note: Due to service updates, cable clamps may be any of
the various designs listed below. Visual identification will
be required.
Non-UL Spec
21A 1320162 1 Clamp (Only Available on 1930ES)
21B 1320061 2 Clamp (Only Available on 2030ES/2630ES)
21C 3574714 1 Clamp (Available on All Models)
21D 1001091492 1 Clamp (Used as part of Service Update on 1930ES)
21E 1001094301 2 Clamp (Used as part of Service Update on 2030ES/
2630ES/2646ES/3246ES)
UL Spec
21F 1320162 1 Clamp (Available on All Models)
21G 1001091492 1 Clamp (Used as part of Service Update on 1930ES)
21H 1001094301 2 Clamp (Used as part of Service Update on 2030ES/
2630ES/2646ES/3246ES)
22 4191709 1 Bolt M6 x 25mm
23 4340751 A/R Mount, Cable Clamp Options:
A/R Non-UL Spec (1930ES Only)
1 UL Spec
24 4811900 1 Flatwasher M8
25 A/R Bolt M6 Options:
0760606 1 1930ES/2030ES/2630ES (12mm Length)
0700608 1 2646ES/3246ES(16mm Length)
26 3290605 A/R Locknut M6
27 1321283 A/R Clamp, Hose (2646ES/3246ES Only)
28 4811702 A/R Flatwasher M6 Wide (Non-UL Spec)
29 4831700 A/R Lockwasher M6 (Non-UL Spec)
30 to 50 Not Used
Ref. Items 51 - 56 may be used on machines with service update
kits.
51 1001094124 1 Block, Spacer (1930ES Only)
52 0700624 1 Bolt M6 x 80mm
53 0700619 2 Bolt M6 x 55mm
54 4751400 A/R Flatwasher 1/4” Wide
55 4811700 A/R Flatwasher M6
56 3290606 A/R Locknut M6
Ref. ALARM INSTALLATIONS
0272810 Ref. ANSI Spec F
0273443 Ref. Australian Spec B
0272811 Ref. CE Spec D
0272722 Ref. Descent Alarm A
0272913 Ref. Motion Alarm A
101 4922861 1 Harness, Chassis (Not Shown - Section 7 for Breakdown) (USA
Built Machines Prior to S/N 0200126538 & Belgium Built
Machines Prior to S/N 1200003119)
102 0140043 1 Alarm
103 4191706 2 Screw M6 x 12mm
FIGURE 1-4. FRAME MOUNTED COMPONENTS (CONTINUED)
ITEM # PART NUMBER QTY. DESCRIPTION REV.