3 status indicators, 4 function indicators – Eppendorf C-76 Classic Water Bath Shaker User Manual
Page 15

15
New Brunswick
Operating manual
•
SELECT
This key is used to change the displayed parameter.
•
σ(UP), τ(DOWN)
These keys are used to increase or descrease
the setpoint of a displayed parameter. They also
allow the user to enter the
SET MODE
for setpoint
changes.
4.1.3 Status Indicators
Four status indicator lights are located to the left of the
LED DISPLAY
:
•
MAINT
Remains lit after 10,000 hours of use. Accumulated
running time is internally monitored and may be
displayed as a guideline.
•
SET
Indicates that the shaker is in the
SET MODE
and
setpoints are being displayed and can be altered.
•
TIME
Indicates that the timer is in operation. The shaker
can be programmed to run for a preset time from 0.1
hr. to 99.9 hrs. The timer can be disengaged
without stopping an ongoing run.
•
MUTE
Not applicable
4.1.4 Function Indicators
Four function indicator lights are located to the right of the
LED DISPLAY
.
They indicate the current parameter being displayed:
•
RPM
shaking speed (revolutions per minute)
•
HOURS
time remaining
•
°C
temperature
•
*
not applicable