Eppendorf 5000 Digital Tier Shake - Manual (Page 8)

8
New Brunswick Operating Manual
Figure 1: Front View
1.2 Universal Power Module
Voltage and frequency have been set prior to shipment. Innova shakers are available
in 100V, 120V, 220V and 240V, and can accommodate both 50 and 60 Hz
frequencies.
A voltage selector, which is incorporated in the power entry module, and a frequency
selector switch are used to select the appropriate voltage and frequency. This
universal system adapts to worldwide power requirements.
WARNING!
Do not plug the shaker into a power source until you check
the voltage and frequency settings.
Check the voltage selection on the power entry module (see
Figure 4) against the Caution label located over the power
cord connection and your electric power source.
Check the position of the frequency selector switch (see
Figure 4).
Also see Section 5.2, Changing Voltage & Frequency.