Eppendorf 5000 Digital Tier Shake - Manual (Page 35)

35
Innova 5000  M1196-0050 Operating Manual
7 7 S S
P P E E C C I I F F I I C C A A T T I I O O N N S S
Shaking
Speed 25-350 rpm
Motion 2" (50.8 mm) diameter circular orbit
Indication LED digital electric display, 1 rpm increments
Setpoint & Control Digital adjustment with PI microprocessor control
and instantaneous visual feedback
Accuracy ± 1 rpm (see NOTE below)

NOTE:
At 25-350 rpm, the unit will perform to specifications with up to ±10% line
voltage fluctuation.
Drive
Eccentric counterbalanced ball bearing drive
Keypad Timer
Programmable shaking periods from 0.1 hour to 99.9 hours by a digital timer that
shuts off at the end of period and energizes status light.
Timer counts down and digital display indicates remaining time. Can be
deactivated for continuous operation. Additionally, unit will display total
accumulated running time for service information.
Operating Ambient Environment
0
°C - 60°C, 90% relative humidity, non-condensing
Self-Diagnostic Status
Warning signal (audible and visible) indicates when shaking speed deviates more
than 5 rpm and when timer operation has expired. Audible alarm can be
deactivated/reactivated by the operator.
Remote Monitoring
Optional chart recorder output for speed 0-5V, 1V per 100 rpm.
Accuracy ±25mV.
Automatic Restart
Unit will automatically restart after undesired power interruption. Setpoints are
maintained by non-volatile memory. Interruption is indicated by a flashing LED
display.
Motor
1/3 HP, brushless ball bearing DC motor.
Electrical Service
100V, 120V, 220V, 240V. All voltages 50/60 Hz 150 VA.
Universal power entry system adapts to U.S. or international requirements.
Electrical Protection
Main power control circuits provided with separate fuse.