beautypg.com

2 user interface keys, 3 status indicators, User interface keys – Eppendorf 5000 Digital Tier Shake User Manual

Page 10: Status indicators

background image

10

New Brunswick

Operating Manual

• Hours remaining (timed run)

1.3.2

User Interface Keys

START/STOP

This key is used to start or stop the shaking
motion. It will also activate or stop the timer when
timed run is desired.

σ, τ

These keys are used to adjust the setpoint of a
displayed parameter up or down. They also allow
the user to enter the Set mode for setpoint changes.

SELECT

This key is used to change the displayed
parameter.

1.3.3

Status Indicators

MAINT

Lights after 10,000 hours of use, to indicate need
for routine maintenance. Accumulated running
time is internally monitored and may be displayed
as a guideline.

SET

Lights to indicate that the shaker is in the Set
mode, setpoints are being displayed, and setpoints
can be altered.

TIME

Lights to indicate that the timer is in operation.
Innova shakers can be programmed to run for a
preset time from 0.1 hour to 99.9 hours. The timer
can be disengaged without stopping an ongoing
run.

MUTE

Indicates the status of the audible alarm. When the

MUTE

indicator is illuminated, the audible alarm

device is disabled.