Blade ICE G8000 User Manual
Page 66
RackSwitch G8000 Application Guide
66
Chapter 4: Ports and Trunking
BMD00041, November 2008
All trunk members must be in the same Spanning Tree Group (STG) and can belong to
only one Spanning Tree Group (STG). However if all ports are tagged, then all trunk ports
can belong to multiple STGs.
When a trunk is enabled, the trunk’s Spanning Tree participation setting takes precedence
over that of any trunk member.
You cannot configure a trunk member as a monitor port in a port-mirroring configuration.
Trunks cannot be monitored by a monitor port; however, trunk members can be moni-
tored.
All ports in static trunks must be have the same link configuration (speed, duplex, flow
control).