Installation adjustments – Barco DATA 708 User Manual
Page 28
Installation Adjustments
7 - 8
5975987A BARCODATA 708 260597
Loosen the four hexagon screws A, A', B and B', upper and lower
fixation latch. These screws fasten the cooling house of the red tube.
Pivot the red CRT until the center of the red image coincides with the
center of the green image. If the angle of the red CRT is corrected,
tighten the four bolts.
A'
B'
C'
D'
A
B
C
D
A' A
B'
C'
B
C
D'
D
Screws A, B, C and D (M4) : upper
fixation latch. nutdriver 7mm.
Screw A', B', C' and D' (M4) : lower
fixation latch. nutdriver 7mm.
CRT
PROJECTION ANGLE
ADJUSTMENT
Align crosshairs
red crosshair
green crosshair
red crosshair
green crosshair
Move the red CRT
to the outside, away
from the green CRT
Move the red CRT
towards the green
CRT
ENTER
continues to blue and green crosshairs.
EXIT
will return to CRT projection angle adjustment.
Loosen the four hexagon screws C, C', Dand D', upper and lower
fixation latch. These screws fasten the cooling house of the blue tube.
Pivot the blue CRT until the center of the blue image coincides with
the center of the green image. If the angle of the red CRT is corrected,
tighten the four bolts.
CRT
PROJECTION ANGLE
ADJUSTMENT
Align crosshairs
blue crosshair
green crosshair
blue crosshair
green crosshair
Move the bleu CRT
to the outside, away
from the green CRT
Move the bleu CRT
towards the green
CRT
ENTER
continues to the path selection menu.
EXIT
returns to the CRT projection angle adjustment.