Barco DATA 708 - Manual (Page 17)

Projector Set Up
5-1 5975987A BARCODATA 708 260597
5
PROJECTOR SET UP
Projector Set Up
The strap on the CPU unit allow a set up of the password mode.
Gaining access to the strap
- Open the top cover (see installation set up)
- Open the chassis (see installation set up)
Horizontal scan
connectors
Vertical scan
connectors
Convergence
connectors
COMM PORT
(800 peripherals) REMOTE R G(S) B S VIDEO S-VIDEO RS232 OUT RS232 IN
strap
Password mode
With a strap on the controller unit, the important projector adjustments
can be protected with a password. When the password feature is
enabled (strap mounted on both legs), the customer has to enter a
password before he can enter the specific adjustment.
When the password menus are disabled (strap mounted only on one
leg), all adjustments are free. This position of the strap is useful for
qualified service technicians because they do not need a password
during service.
Position of the strap :
ON : password disabled
OFF : password enabled
Socket for strap