Aerovent IM-167 - Manual (Page 9)

Aerovent IM-167 9
Mounting Brackets
SCBD and SCDD square inline fans can be mounted
in any position: horizontal, vertical or angular. They can
be hung from above or mounted on the floor. Typical
dimensions (E and F) for the mounting brackets that
are supplied with these units are shown on page 8.
The 9 ⁄
16
" holes in these brackets can readily be used
for installing the units. To obtain optimum isolation, the
SCBD unit should be installed with the motor above or
below the fan body.
Floor Mounting
Overhead Mounting
HANGER ROD, NUTS &
WASHERS (BY INSTALLER)
HANGER HOUSING
BOLT, NUTS &
WASHERS (INCLUDED)
HANGER BRACKET
SCBD/SCDD UNIT
NEOPRENE
ISOLATOR
2.72
2.15
5.25
3.69
3.00
SCBD/SCDD UNIT
SPRING
ISOLATOR
HANGER BRACKET
SCBD/SCDD UNIT
SCBD/SCDD UNIT
FINISHED FLOOR
SCBD/SCDD UNIT
3.50
1.50