Snorkel XT24SD-sn000001+ - Manual (Page 13)

1/31/2008 - 17 -
Outrigger proximity and pressure switches are non-adjustable. The machine
will not operate if these switches are disabled.
Outriggers are to be fully retracted, slid into transport position and locked for
transport. Please refer to transport pictures in “towing procedure” section of
this manual.
ELECTRIC OUTRIGGER MANUAL OVER RIDE
Before manually over riding the outrigger, turn emergency disconnect switch to
off position.
To operate remove the top plastic cap and turn the 3/8” nut on top clockwise to
raise leg and counter clockwise to lower leg.
Use only a 3/8” wrench on this hex nut.
DO NOT LEAVE THE WRENCH ON THIS NUT UNDER NORMAL
OPERATIONS. FAILURE TO DO THIS COULD RESULT IN DEATH OR
SERIOUS INJURY.