Snorkel TB126J - Manual (Page 62)

10. DAILY INSPECTION & MAINTENANCE
10 - 6 P/N 0191915
13. Structural damage & welds
Visually inspect all welds for cracks, all structural
members for deformity, and all sheet metal for
dents that could interfere with machine
operation.
Pay particular attention to boom welds. Closely
inspect boom welds, all the way around, for
cracks.
14. Platform gravity gate
Inspect the gate to be sure it is present and
moves freely.
15. Axle/boom interlock
3
2 1
With the axles (1) (2) retracted and the pin lock
(3) in place, you should not be able to raise the
main booms over a couple of degrees above the
horizontal nor should you be able to extend the
platform much beyond four feet (1.2m).
6
5
4
With the axles (4) (5) extended and the pin lock
(6) out, you should not be able to raise the main
booms over a couple of degrees above the
horizontal nor should you be able to extend the
platform much beyond four feet (1.2m).
8
9
7
With axles (7) (8) extended and pin lock (9) in
lower hole, extend the main boom 10 - 20 feet
(3 - 6 m).