Snorkel SP22 - Manual (Page 60)

8. At each drive wheel, remove the pin, push
the center shaft in and replace the pin (refer
to Figure 11.4).
Figure 11.4 - Drive Wheel
9. Do not exceed 10 mile per hour (16 km/h)
when towing. Use caution when turning a
corner or around a curve.
The aerial platform is free to move when the
drive hubs are disabled. Death or serious
injury can result. Re-enable the drive hubs
before operating the aerial platform.
10. At each drive wheel, remove the pin, release
the center shaft to its original position and
replace the pin.
11. Turn steer float valve clockwise.
12. Unfasten the tow vehicle from the machine
and replace the tow kit on the storage
cradles.
13. Verify that the drive system operates
page 11 - 6 SP20/SP22 – 11890A
Chapter 11. Options
Center Shaft
Pin
CAUTION
DANGER