Chapter 13. troubleshooting – Snorkel SP18 User Manual
Page 66
Symptom
Possible Cause
Corrective Action
Circuit breaker will not
reset.
Circuit breaker has not had time to
reset.
Electrical system malfunction.
Wait one minute for circuit breaker to
reset.
Do not operate machine until repairs
are made.
Hydraulic fluid
temperature 200°F
(93°C) or more.
Prolonged driving or boom operation.
High pressure fluid return to reservoir
caused by kinked or twisted hose.
Hydraulic system component failure.
Stop operation until fluid cools.
Remove the kink or twist from the hose.
Let fluid cool before resuming
operation.
Stow the machine and do not operate
until repairs are made.
Severe hydraulic leak.
Failure of hose, tube, fitting, seal, etc.
Do not operate machine until repairs
are made.
page 13 - 2
SP17/SP18 – 11972A
Chapter 13. Troubleshooting