Snorkel S2033CE - Manual (Page 23)

Chapter 7 – Controls
S2033 – 330003EE 19
If the platform is elevated just past 1.8 m (6 ′) and material
is added to the platform overloading it, a control module
will stop the lift, drive and lower functions and the alarm
will sound and the warning light will flash. In this case,
remove the load in excess of rated capacity and cycle
the emergency stop button at the upper controls to re-
turn to normal operation.
Horn Button
The horn button is on the left side of the upper control
box. Press the button to sound the horn.
Battery Condition Indicator
The optional battery condition indicator gauge is on the
top of the upper control box. It indicates the level of avail-
able battery power to operate the aerial platform.