Snorkel SPX10 - Manual (Page 24)

OPERATOR’S MANUAL
with Maintenance Information
Operating Instructions
20
Emergency Stop
Push in the red Emergency Stop button to the
off position at the ground controls or the
platform controls to stop all machine functions .
Repair any function that operates when either
red Emergency Stop button is pushed in.
Operation from Ground
1 Pull out both ground and platform red
Emergency Stop buttons to the on position.
2 Turn the key switch to power on.
3 Be sure the battery pack is connected
before operating the machine.
Lift and Drive and steer functions are not
available from the ground controls.
Operation from Platform
1 Pull out the ground and platform red
Emergency Stop buttons to the on position.
2 Press the mode button to select lift function.
3 Be sure the battery pack is connected
before operating the machine.
To Position Platform
1 Move the joystick forward to raise the
platform.
2 Move the joystick backward to lower the
platform.
To Steer
1 Press the mode button to select the drive
function.
2 Move the joystick left to turn the machine to
left direction.
3 Move the joystick right to turn the machine
to right direction.
To Drive
1 Press the mode button to select the drive
function.
2 Move the joystick forward to drive the
machine to forward direction.
3 Move the joystick backward to drive the
machine to backward direction.
4 Increase speed: Press the celerating
button.
Decrease speed: Press the decelerating
button.
Stop: Return the joystick to center or press
the On-off button.
Machine travel speed is restricted when the
platform is raised.
Auxiliary Lowering
At the Ground Controls
In the event of a power failure, use the backup
auxiliary lowering function.
How to use the Safety Arm
1 Raise the platform approximately 1.3 m
from the ground.
2 Rotate the safety arm away from the
machine and let it hang down.
3 Lower the platform until the safety arm rests
securely on the link. Keep clear of the safety
arm when lowering the platform.