Addictive Desert Designs 2010 – 2014 Ford F150 Series Flat Bar Roof Mount - Manual (Page 3)

4. With the bracket in position, mark and drill the three holes with the 1/4” drill bit and install the
rivets and bracket according to the rivet tool manufacturer’s instructions. Repeat for the other
side.
5. Replace the molding on both sides and wire the light according to instructions included with the
light.
6. If you drive a 2013-2014 Ford Raptor your windshield wipers should look like the picture below
and trim 2” off top edge of driver and passenger side as shown.