Smittybilt SB2804 Winch Plate - Manual (Page 3)

For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 1600 Walnut Parkway, Compton, CA 90220
Revised 8.4.10
Installation Instructions:
Winch Plate (Part# SB2804)
2007-2010 Jeep JK
STEP 8: Check fit the previously cut slots in the bumper by temporarily installing the
bumper to the vehicle. If the slots are unsatisfactory then additional trimming will be
necessary.
Fig. C & D
STEP 9: Install the winch to the winch plate according the manufacturers instructions.
Torque winch hardware according to manufacturers specifications.
STEP 10: Reinstall the bumper to the vehicle using the previously removed OE hardware.
Torque the bumper hardware according to the manufacturers specifications.
STEP 11: Installation is now complete. Check to make sure all bolts are secure. (You may use
included hardware to attach fairlead)
Product cleaning and maintenance instructions
Stainless Steel Finish – Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild
soap, window or glass cleaner may be used to clean the finish. Dual state powder coat finish – Mild soap, win-
dow or glass cleaner may be used to clean the finish. In order to protect the finish, you may wax your product on a
regular basis with pure carnauba automotive wax. Do not use any types of soap, polish or was that contains abra-
sive that could damage the finish. Textured coated finishes should be cleaned with a mild soap on a damp sponge.
Do not apply polish or wax that requires to be removed by means of buffing. This type of wax is commonly used at
car wash facilities. Chrome Finish – Mild soap, window or glass cleaner may be used to clean the finish. In order
to protect the finish you should wax your product on a regular basis with pure carnauba automotive wax. Do not
use any types of soap, polish or was that contains abrasive that could damage the finish.