Smittybilt D7031 Jack Mount - Manual

WWW.SMITTYBILT.COM
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
Jack Mount
Universal
Part # D-7031
Parts Included Qty Parts Included Qty
Jack Mount, Right Hand(D-7031R) 1 Jack Mount, Left Hand (D-7031L) 1
Step 1:
Find a suitable mounting location for the jack mount.
Step 2:
Using the jack mounts as templates, set on your desired location then mark and drill
the 4 -3/8” mounting holes.
Step 3:
Attach the jack mounts with bolts, flat washers, lock washers, and nuts (not included)
Step 4:
Tighten all hardware.
NOTE:
This is a universal mount and hardware is not included due to the numerous
variations of mounting possibilities. It is recommended to use grade 5 or higher
hardware when mounting.
Grade 8 nut torque specifications
Standard Metric
5/16” nuts 20 ft. lbs. M6 9 ft. lbs.
3/8” nuts 35 ft. lbs. M8 23 ft. lbs.
7/16”nuts 60 ft. lbs. M10 45 ft. lbs.
1/2” nuts 90 ft. lbs. M12 75 ft. lbs.
9/16” nuts 160 ft. lbs. M14 120 ft. lbs.
5/8” nuts 175 ft. lbs.
M16 165 ft. lbs.
Please read instructions entirely before installing this product.