Smittybilt 933xx Standard Top - Manual

WWW.SMITTYBILT.COM
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
Standard Top (Part # 933xx)
1997-2006 Jeep Wrangler
Step 1: Place brief on top of vehicle. Insert front plastic channel on brief into your windshield header.
(Fig A)
Step 2: Locate the two Velcro straps on the front of each corner and attach. This is designed to help water
run off the side of the brief. (Fig B)
•
Pull strap A over the top of the crossbar towards the inside of the vehicle.(Fig C) the Velcro
of strap A should be facing outward from the roll bar.
•
Strap B wraps around the outside of the roll bar.
•
Attach strap B to strap A on the underside of the roll bar. (Fig D)
(Fig A) (Fig B)
(Fig C) (Fig D)
Note: Please read instructions entirely first before installing this product. Installation requires a windshield
header. (Smittybilt part # 90104) For best results install when temperature is above 70 degrees.
Strap A
Strap B
Strap B
Wrap strap A over the top of the roll bar