beautypg.com

Installation instructions, Neoprene seat covers – Smittybilt Neoprene Seat Covers User Manual

Page 2

background image

WWW.SMITTYBILT.COM

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 400 West Artesia Blvd, Compton, CA 90220

Installation Instructions

Neoprene Seat Covers


Step 3: Place bottom portion of cover on bottom section of the seat. Push the back end through the center
section of the seat. (Fig C) Fold the side of the cover down around the edges and front of seat.


Step 4: If your particular model has straps on the front run them under the seat towards the back and connect
them to the buckles that you pushed through the seat. (Fig D) Make sure that the straps do not
interfere with any seat operations.


(Fig C)

(Fig D)




Step 5: If your model has straps with hooks on them simply pull them snug under your seat and attach
to an appropriate place that does not interfere with seat operation. (Fig E)


Step 6: Make any adjustments needed to make the cover straight. Pull straps/buckles snug. Install headrest
covers if applicable. Installation is now complete. (Fig F) Use the same process for opposite side.




Push the back end through the center
section of the seat towards the back.

Run the straps under the seat towards the
back and connect them to the buckles
that you pushed through the seat.