Smittybilt FN1750-S4 Sure Steps - Manual (Page 2)

For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 1600 Walnut Parkway, Rancho Dominguez, CA 90220
Installation Instructions
Sure-Step (Part # FN1750-S4)
01-03 Ford F150 Super Crew
Step Four: Locate the left side bar, two #30 plastic rings, two 12mmx 50mm bolts, four 12mm flat washers and four 12mm
lock washers. Secure the sidebar and #30 plastic rings to the support brackets as shown in fig #5. Fully tighten all hardware
at this time. Torque all hardware to 30 ft-lbs.
Fig #1 Fig #2 Fig #3
Fig #4
Fig #5
(Photos are for reference only, actual brackets may be a different.)
Step Five: Repeat steps two through four on opposite side of vehicle.
Be sure to use all hardware supplied and tighten all bolts.
IMPORTANT: Side bars have a 300 lb. weight capacity. To protect your investment, wax this product after installing.
Regular waxing is recommended to add a protective layer over the finish.