Smittybilt DN250-S4 Sure Steps - Manual (Page 3)

For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 1600 Walnut Parkway, Rancho Dominguez, CA 90220
Installation Instructions
Sure-Step (Part # DN250-S4)
06 Dodge Ram Mega Cab
The customer should take off the
black sticker on the middle of frame, and then they will see
two holes there. Use the T-bolt ( bolt plate ) hook the center hole through the neighbor hole
like the left picture above. After that, they can install the center bracket without any problem.
Figure 1.3 –Driver-Side Front Assembly View (1500/2500/3500 Series set-up shown)
Figure 1.5 – 1500/2500/3500 Front Mount Assembly
Cleaning and Maintenance
To protect your investment, wax this product after installing. Regular waxing is recommended to add a
protective layer over the finish. Do not use any type of polish or wax that may contain abrasives that could
damage the finish.
For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild soap,
window or glass cleaner may be used also.