Synergy 8585 - Front Upper Control Long Arms for Dodge - Manual (Page 4)

8) With control arms lengths set, torque control arm bolts as follows:
 Lower Control Arm bolt at axle (18mm) = 160 ft-lbs
 Lower Control Arm bolt at axle (16mm) = 145 ft-lbs
 Upper Control Arm bolt at axle = 125 ft-lbs
 Lower Control Arm bolt at frame = 160 ft-lbs
 Upper Control Arm bolt at frame = 125 ft-lbs
 Track Bar Bolt = 145-150 ft-lbs
9) Reinstall wheels and tires and lower the truck to the ground. Be sure the Johnny joints are neutral at ride
heights and torque the pinch bolt bungs to 80 ft-lbs. Put a wrench on the adjuster sleeve at this time and
try to move the adjuster. Make sure pinch bolt has adequately clamped onto Johnny Joint shank so that
the adjuster is not movable.
10) Recheck all hardware after 100 miles of driving.
Installation is Complete