Synergy 8585 - Front Upper Control Long Arms for Dodge - Manual (Page 3)

6) Adjust control arm length by turning adjuster sleeve with the arm fully installed. Do not remove the
control arm and unthread the forged joint by hand. The Synergy double adjuster assembly is designed to
be adjusted without removal from vehicle. When looking at the arm from the forged joint end, turn the
adjuster clockwise to shorten the arm, counter clockwise to lengthen it.
7) We recommend the following control arm lengths for proper caster settings and axle placement.
Stock Height Vehicles
 Lower Control arm = 34-1/8”
 Upper Control arm = 32-3/8”
 Factory = 38-7/8”
3” Lifted Vehicles
 Lower Control arm = 34-1/4”
 Upper Control arm = 32-3/4”
 TB length = 39-1/8”
6” Lifted Vehicles
 Lower Control arm = 34-1/2”
 Upper Control arm = 32-3/4”
 TB Length = 39-7/16”
 NOTE – 2-1/2” Bump Stop Spacer required