beautypg.com

Synergy 8585 - Front Upper Control Long Arms for Dodge User Manual

Page 2

background image

4) The control arms come assembled at their shortest length. Install them at their shortest length. Install

upper control arm as shown with the Johnny joint at the axle side and the bushing up at the frame side.
Position the grease zerk on the Johnny joint so it points down.

5) Use the OEM bolt at the axle side. Install so the nut is on the outside. Use the 9/16-12 UNC x 4.0” long

bolt at the bracket side. Use a washer under the bolt head. Install the stover nut on the inside of the
bracket.

 Note – all control arm hardware for the bracket side is included in the 8581 Long arm

bracket kit.