Synergy 8020-20/8040-20 - Jeep JK 2 - Manual

SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397
8020-20 / 8040-20 JEEP JK STARTER KIT
GENERAL NOTES:

These instructions are also available on our website; www.synergymfg.com. Check the website before
you begin for any updated instructions and additional photos for your reference.

The installation of this kit requires minor drilling.
PARTS LIST:

8057-20 – 2” FRONT BUMP STOP SPACERS
 (2) 8058-20-01 JK 2.0” Rear Bump Stop Spacers
 (2) 3/8-16 UNC x 2-1/4” long socket head cap screw
 (2) 3/8-16 UNC flange nut

8058-20 – 2” REAR BUMP STOP SPACERS
 (2) 8058-20-01 JK 2.0” Rear Bump Stop Spacers
 (4) 3/8-16 UNC x ¾” long hex head bolt
 (4) 3/8-16 UNC flange nut
 (4) 3/8” flat washer

8060 – JK REAR SWAY BAR LINKS
 (2) 806001 JK rear sway bar links assembled with tie rod end & jam nut
 (2) ½-20 UNF top lock flange nut

8083 – FRONT JEEP JK BRAKE LINE RELOCATION KIT
 (2) 808301 Front brake line relocation bracket
 (2) 1/4”-20 UNC x 3/4" long hex head bolts
 (2) 1/4”-20 UNC nylock nuts
 (4) 1/4" GR8 flat washers

8084 –REAR JEEP JK BRAKE LINE RELOCATION KIT
 (2) 80840 Rear brake line relocation bracket
 (2) 1/4”-20 UNC x 3/4" long hex head bolts
 (2) 1/4”-20 UNC nylock nuts
 (4) 1/4" GR8 flat washers